Products, Pricing & Colors
|
Gun Holsters
It all starts with the leather. All of my products are made from premium saddle grade vegetable tanned (American) Hermann Oak leather. I hand select each hide at my supplier to get the best leather possible.
I start with all natural sides. I cut and hand dye every product.
I currently offer:
IWB (inside the waist band) I offer the IWB in 3 different styles.
Straps and snaps, double clipped, and single clip. Any of the clipped models can be made into a tuckable.
OWB (outside of the waistband) I offer the OWB in 2 different models.
The double slotted pancake and the speed scabbard.
Most IWB and OWB holsters with clips, loops with snaps or belt slots are $85.
For Horsehide add $10 (available in black or dark chocolate only)
For tuckable clips add $35
Small single clipped holsters and pocket holsters range from around $45 to $65 depending on style and features.
The Chameleon (belt slide and IWB combo holster) are $30 with free shipping.
Call or email for special features such as exotics, double stitching etc.
All prices are plus shipping unless otherwise noted. If in the state of Ohio add 7% sales tax.
The Chameleon
Named for its versatility and adaptability. The Chameleon can be used right handed, left handed, IWB or OWB with most full sized, compact or sub compact models. Have a Glock 30 but also want to use this holster for a Glock 19? No problem for the Chameleon! While The Chameleon is extremely affordable, it still offers the same top quality you have come to expect from Barber Leather Works.
If you have a question on fitment for your model please email or call. I usually try to keep a few of these in stock. Check the holster pictures page for some pictures of this holster.
If I don't have the dummy in stock for your particular model just call or email and I will check to see if I can get it.
I can add exotic trims etc upon request and will work with you on custom leather designs. Keep in mind custom work isn't cheap! Please understand custom gun leather is very time consuming so I must account for the extra time involved in order for me to make a living.
If I dont have a dummy in stock for your particular model please call or email I may be able to get it.
My current stock of molds on hand are:
Beretta:
92F
Bersa:
Thunder .380
Colt/Kimber (or most 1911 platforms except Springfield):
1911 Full sized govt 5"
1911 Commander 4 1/4"
1911 Officers Model 3-1/2"
1911 3"
Mustang .380
CZ:
2075 Rami
Glock:
30/29
19/23/32
26/27/33
17/22/31
36
20/21
HK
P2000 USA Version
Full sized HK45
HK45C
HK USP 45C
Keltec:
P3AT
Magnum Research Inc.
Micro eagle .380
Ruger
LCP
LCR
Sig Sauer
P238
P239
P230/P232
SP2340
P220 Compact
Smith & Wesson:
1-7/8-2" 5 shot J frame's
M&P 9/40 full size
M&P 9/40 compact
Springfield:
XD9 or XD40 Subcompact 3"
XDM 40/9 3.8"
XDM 40/9 4.5"
Walther:
PPS
|
Magazine and flashlight pouches
|
|
Magazine and flashlight pouches are availible in just about any configuration you need. Call or email so we can discuss a solution to your carry needs. Prices start at $35.
Magazines:
Glock 19/23/32/30/29/26/27/33/20&21
Magnum Research: Micro Eagle
HKP2000
Colt/Kimber (or most 1911 platforms)
Sig P220
Flashlights:
Surefire Lumamax LX2
|
 |
| Sizing Illustration |
|
Belts
Attention: We will not accept returns on belts. Please measure carefully and follow the instructions exactly as listed or call me for help. Each belt is custom made based on the measurements you give me. They take a lot of time to make and I cant do anything with a return. There are just to many sizes and color choices. Thank you for your understanding.
My gun belts are 2 pieces of 6-7 ounce hand cut leather. The outside is dyed to the color of your choice and the inside is left natural. I then glue and stitch them together with the smooth side out on both sides, bevel and burnish the edges then seal the belt. The buckles are attached with chicago screws. The result is a belt built to last for years of everyday use. The leather I use is the same high quality Hermann Oak leather that I use for my holsters. It is tight grained strap leather, stiff enough to support your rig yet supple enough for all day comfort.
My belts don't feel like you are wearing a hoola hoop and will conform to your natural shape over a short time.
For your comfort, I can make your belt to the nearest 1/2".
I normally include a total of 7 holes 3/4" apart so if you would like something otherwise please specify when ordering.
Each belt is made for you specifically so please be sure of your measurement!
Pricing
All belt prices below are for the standard 1-1/2 wide and If ordered with a holster there is a $10 discount* on the prices below (not valid with any other offers or discounts). I can make belts in any width you wish however, the 1-1/2 are recommended because of their outstanding support for most large weapons.
29"-49" $75
50"-59" $85
60"-70" $95
Sizing
DO NOT order your waist size or pant size.
Please follow the measuring instructions below before you order.
To measure a belt you use now: measure from the far end of the buckle to the hole you use most often (to the nearest inch). This is the number I need (to the nearest 1/2 inch). This will be approximately two inches larger than your waist or pant size. See Illustration above right.
If you don't have a belt use a cloth tape measure. Put it through the belt loops on your pants and pull it a bit snug. Note the measurement to the nearest 1/2 inch. If you wear an IWB be sure to allow enough room for that. Remember belts are not returnable.
My belts are firm enough to support most popular concealed carry firearms. If you carry an extremely heavy pistol on any belt and you don't buckle it firmly enough, it will sag. Remember this when deciding which hole in your current belt to measure to, especially if you are going to be carrying IWB. Put on your rig and adjust it to the proper snugness for secure comfort. Look at which hole you are using and measure from the end of the buckle to that hole.
If you need any help call or email me and Ill walk you through it.
|
Chrome plated solid brass left and solid brass on the right
|
Available colors from left to right: Light Brown, Dark Brown, Black Cherry, Dark Chocolate, Black
|
| FAST HOLSTERS now available for 29.95 with free shipping if ordered with any other Barber Leather Works product. Shipping extra if ordered by themselves. |
|
The FAST Holster utilizes three permanent magnets over-molded in
poly-urethane plastic, resulting in a secure, non-marring holster
that allows you to locate your firearm almost anywhere.
Click on the thumbnail pictures below to see one in action
|
|
